Base Profile Template: Select the printer from the list with which you will be dual-extruding.Process Group Name: This will be the name of your Grouped Processes.Then, go to Tools > Dual Extrusion Wizard and configure your settings: For this example, we will be using CocoNut’s traffic cone model. Next, import the models you would like to dual-extrude into Simplif圓D. If you already selected your printer profile when you started the software for the first time, you may skip this step.

To get started, go to Help > Configuration Assistant and ensure that your printer profile is loaded. The Dual Extrusion Wizard makes it extremely easy to set up a dual extrusion print.

Available build volume for Sync mode is (Left extruder) X95 Y320.Printing Multiple Parts with the Dual Extrusion Wizard.

Align your model on the left halve of the X-axis in the build volume.

Simplif圓D auto configure extruders Always choose “Left extruder only”.

Support material has to be same material as model since right extruder is already busy copying the left extruder.

The preparation in simplif圓d, is quite similar to preparing a print for “Single Extruder” because: Single printhead = single material.

The left and right printhead print the same model(s) simultaneously.

Also these models need to be aligned correctly so they have the correct fit. Each color / material needs to have their own STL. This wizard will help you to select the right extruder for the right part of the model.

Use the ‘Dual Extrusion Wizard” in the upper bar of the simplif圓D interface select “Tools”and then Dual Extrusion Wizard.

Your model made out of two different colors / materials?.

Then in the “Layer” tab and “Infill” tab choose “Right Extruder” The actual model (hence layers & infill) will be printed with the right extruder. In this example the left extruder will be printing the support material. Now, its time to assign these extruders correctly., in the “support” tab navigate to “Support Extruder” and choose “. Both extruders can now be used for this process. Choose “Both extruder” at “auto-configure extruders”.Your model out of Material A with Right extruder, and support out of material B with Left extruder?.So in practice only 1 printhead is printing at a given time. sequentially means that the printhead take turns in which they are active.One or multiple models, printed with 2 printheads sequentially.

How to dupllicate models in simplify 3d